Development and application of automation algorithm for optimal parameter combination in two-dimensional flow analysis model

Sehyuck An; Eun-taek Shin; Chang Geun Song; Sungwon Park

doi:10.3741/JKWRA.2023.56.S-1.1007

All Issue

2023 Vol.56, Issue 12S Next Page

Research Article

Development and application of automation algorithm for optimal parameter combination in two-dimensional flow analysis model 2차원 흐름해석모형의 매개변수 최적조합결정 자동화 알고리즘의 개발과 적용

31 December 2023. pp. 1007-1014

PDF XML

Abstract

Two-dimensional flow analysis, a fundamental component of hydrodynamics, plays a pivotal role in numerically simulating fluid behavior in rivers and waterways. This modeling approach heavily relies on parameters such as eddy viscosity and roughness coefficient to accurately represent flow characteristics. Therefore, combination of appropriate parameters is very important to accurately simulate flow characteristics. In this study, an automation algorithm was developed and applied to find the optimal combination of parameters. Previously, when applying a two-dimensional flow analysis model, former researchers usually depend on the empirical approach, which causes many difficulties in finding optimal variable values. Using the experimental data, we tracked errors according to the combination of various parameters and applied the algorithm that can determine the optimal combination of parameters with the Python language. The automation algorithm can easily determine the most accurate combination by comparing the flow velocity error values among the two-dimensional flow analysis results among the combinations of 121 (11×11) parameters. In the perspective of utilizing automation algorithm, there is an expected high utility in promptly and straightforwardly determining the optimal combination of parameters with the smallest error.

Keywords

Two-dimensional flow analysis

Eddy viscosity

Roughness coefficient

Automation algorithm

Optimal parameter combination

천수방정식 기반 흐름해석모형은 하천 및 수로에서의 흐름을 수평 2차원적으로 수치모의하는데 활용되며 매개변수인 와점성계수와 조도계수에 큰 영향을 받는다. 따라서 적절한 매개변수의 선택은 흐름특성을 정확하게 모사하기 위해 매우 중요하다. 본 연구에서는 2차원 흐름해석에 적용되는 매개변수의 최적조합을 찾기 위한 자동화 알고리즘을 개발하고 적용하였다. 기존연구에서 2차원 흐름해석모형을 적용하는 경우 매개변수의 선정에 있어 경험적인 방법을 사용하여 최적의 매개변수를 찾는데 어려움이 있었다. 따라서 본 연구에서는 실험결과를 활용하여 다양한 매개변수의 조합에 따른 오차를 추적하고, 매개변수의 최적조합을 결정할 수 있는 알고리즘을 Python 언어를 이용하여 개발하고 적용하였다. 자동화 알고리즘은 121(11×11)개의 매개변수 조합에 따른 2차원 흐름해석결과 중 유속모의결과의 오차값을 비교하여 가장 정확한 조합을 손쉽게 결정하도록 구성되었다. 오차가 가장 작은 매개변수의 최적조합을 자동화 알고리즘의 적용을 통해 신속하고 간단하게 결정할 수 있다는 측면에서 높은 활용가치가 있을 것으로 기대된다.

키워드

2차원 흐름해석

조도계수

와점성계수

자동화 알고리즘

매개변수 최적조합

References

Arcement, G.J., and Schneider, V.R. (1989). Guide for selecting Manning's roughness coefficients for natural channels and flood plains. US Government Printing Office, Vol. 2339, Washington, DC, U.S.

Bae, J.S., Shin, C.H., Lee, J.C., and Yoon, S.B. (2012). "Analysis of effect of roughness coefficient on numerical simulation for stream flow." Journal of Korean Society of Hazard Mitigation, Vol. 12, No. 2, pp. 151-158. 10.9798/KOSHAM.2012.12.2.151

Chai, T., and Draxler, R.R. (2014). "Root mean square error (RMSE) or mean absolute error (MAE)? - Arguments against avoiding RMSE in the literature." Geoscientific Model Development, Vol. 7, No. 3, pp. 1247-1250. 10.5194/gmd-7-1247-2014

Chow, V.T. (1959). Open-channel hydraulics, McGraw-Hill, NewYork, NY, U.S.

Engelund, F. (1966). "Hydraulic resistance of alluvial streams." Journal of the Hydraulics Division, Vol. 92, No. 2, pp. 315-326. 10.1061/JYCEAJ.0001417

Han, S.D., Choi, H., Ahn, C.H., and Lee, Y. (2008). "Analysis of hydraulic characteristics in the middle reaches of Nak-Dong River using 2-Dimensional numerical analysis model." Proceedings of the Korea Water Resources Association Conference, KWRA, pp. 1732-1736.

Henderson, F.M. (1966). Open Channel flow, Macmillan Publishing Co., New York, NY, U.S.

James, C.S., and Wark, J.B. (1992). Conveyance estimation for meandering channels. Rep. SR 329, HR Wallingford, Oxford, U.K.

Kim, H.S., Park, I.H., Sung, H.J., and Lee, D.S. (2019). Development of particle dispersion model for enhancement of water pollution accident analysis results. Korea Institute of Construction Technology Major Business Report, KICT 2019-102, Korea Institute of Construction Technology.

Lee, J.S., Oh, G.E., Park, Y.J., and Jung, J.H. (2012). "Determination of relationships for manning roughness coefficient using hydraulic engineering field." Journal of Korean Society of Hazard Mitigation, Vol. 12, No. 1, pp. 167-177. 10.9798/KOSHAM.2012.12.1.167

Limerinos, J.T. (1970). Determination of the manning coefficient from measured bed roughness in natural channels, US Government Printing Office, No. 1898, Washington, DC, U.S.

Park, I.H., Kim, H.S., and Sung, H.J. (2018). Development of particle dispersion model for enhancement of water pollution accident analysis results. Korea Institute of Construction Technology Major Business Report, KICT 2018-116, Republic of Korea.

Seo, I.W., and Song, C.G. (2010). "Development of 2D finite element model for the analysis of shallow water flow." Journal of Civil and Environmental Engineering Research, Vol. 30, No. 2, pp. 199-209.

Seo, I.W., Lee, K.W., and Baek. K.O. (2006). "Flow structure and turbulence characteristics in meandering channel." Journal of the Korean Society of Civil Engineers B, Vol. 26, No. 5, pp. 469-479.

Yim, D.H. (2007). Analysis of the sensitivity of the two-dimensional analysis model parameter for the flow analysis of the river confluence flow analysis. Master Thesis, Kyungil University.

Information

Publisher :KOREA WATER RESOURECES ASSOCIATION
Publisher(Ko) :한국수자원학회
Journal Title :Journal of Korea Water Resources Association
Journal Title(Ko) :한국수자원학회 논문집
Volume : 56
No :12
Pages :1007-1014
Received Date : 2023-08-30
Revised Date : 2023-10-04
Accepted Date : 2023-10-04
DOI :https://doi.org/10.3741/JKWRA.2023.56.S-1.1007

Journal of Korea Water Resources Association ISSN:2799-8746(Print) 2799-8754(Online) 한국수자원학회 논문집

All Issue